Dry lubricant coating
Our products can be customized to suit your needs. Please let us know your requirements.Please click here for enquiries
HANARL products contain lubricating ingredient dissolved in fluorine-based solvent. As a result, uniform thin films can be formed regardless of skill levels.
The quick-dry solvent dramatically improves efficiency even in line work.
The semi-wet type, in particular, enables high durability thanks to the lubricity of fluorine oil and PTFE and is widely used as an alternative for grease.
Colored and fluorescent-colored products are available for application verification. Many types are available including products requiring no agitation and color-less products that is inconspicuous.
Uniform films can be formed not only by dispenser application, but also by brushing and dipping. Therefore, the workability will be improved regardless of the workers’ skills.
The products can be colored or be transparent, depending on our customers’ needs.
HANARL products contain lubricating ingredient dissolved in fluorine-based solvent. As a result, uniform thin films can be formed regardless of skill levels. The quick-dry solvent dramatically improves efficiency even in line work.
The constituent, consisting essentially of fluorine, is compatible with any materials including resins, rubbers and metals.
Dry products, in particular, are oil-less and do not cause any trouble of transcription.
They are thus applicable to sliding parts near appearance sliding parts under low to medium load.
The fully-dry type causes neither bleeding of oil nor transcription. It therefore enables the use of lubricant in appearance parts.
As downsizing has progressed in electronic mechanisms, precision devices and home appliances, lubrication is being required for parts other than interior parts.
Conventional lubricant painting and plating for near exterior parts are now considered to be high cost and have a problem that coating is applied to portions other than targeted areas.
Against this backdrop, we have developed a completely new type of products, HANARL, which can achieve the performance of plating by simple application.
Amazing durability is achieved without transcription and with no need for special equipment.
Being fluorine-based, the super performance coating provides not only excellent lubricity but also excellent waterproofing properties.
This cleaning solvent is suitable for wiping off dust, oil and fingerprints during and after manufacturing processes. A wide variety of products, including commonly used hydrocarbon-based cleaners and fluorine-based cleaners, are available for wiping off oils.
Also available is a cleaner effective for resins that are subject to cracking and whitening when cleaned by conventional cleaning agents.
Main product: MY-01
This product effectively removes hydrocarbon oils used in manufacturing processes and hand sebum.
Resins, such as acrylic resin, which are subject to cracking and whitening when cleaned by alcohol-based cleaners, can be cleaned well.
Only a small amount is needed to achieve the desired cleanliness, which contributes to the reduction of L/T and operating cost.
GWP and ODP are products that are friendly to the environment. Their low degree of hazard, lower than commonly used hydrocarbon-based cleaners, enables safe and reliable cleaning.
Main product: SZ-202H
This cleaner specializes in cleaning fluorine-based lubricants.
It enables the cleaning of fluorine-based lubricants that are difficult to be removed by alcohol commonly used by general cleaning.
This cleaner prevents static charge from building up after cleaning.
It performs comparably to fluorine-based cleaners and also is environmentally friendly.